How To Use The MicroSkin Applicator
The MicroSkin Applicator makes applying your MicroSkin Barrier easier and more accurate. Designed to assist people with visual or physical impairments, the applicator helps you position your barrier with greater control and confidence. The built-in mirror allows you to see your stoma and align the two-piece barrier accurately before applying it, helping you achieve proper placement without assistance. The MicroSkin Applicator also works with MicroSkin One-Piece Pouches by folding back the sides of the bag allowing it to fit under the bands. With the MicroSkin Applicator, you can take greater control of your ostomy care and regain confidence in your routine.
STEP 1
Flex the barrier and bend back a corner of the square liner.
STEP 2
Remove the rubber bands from the MicroSkin Applicator. Place the barrier on the curved surface with the mirror’s reflective side facing up. Re-secure the barrier by looping the rubber bands over the vertical side strips one at a time.
STEP 3
Once the barrier is held in place by the rubber bands, carefully peel away the center square liner starting from the folded corner, exposing the adhesive surface. Smooth out any wrinkles by stretching the barrier taut under the rubber bands.
STEP 4
Center the applicator mirror directly over your stoma and press firmly against your abdomen. Rock it up and down to ensure full adhesive contact. Pull straight back to release the barrier and the barrier will pop out of the rubber bands.
STEP 5
Remove the liner from the vertical side strips and press down onto skin. Apply gentle pressure over the entire barrier plate.
STEP 6
Remove the paper frame from the non-adhesive side of the barrier. Gently rub over the entire surface of the MicroSkin, focusing on the seal around your stoma to ensure the best possible adhesion.
